Code CR1021 Especificações descarregar pdf (Página 28)

Interface

2

OPTICON Universal menu book

U21

2.3.1. Bluetooth address

To enable the Bluetooth reader to communicate

to another Bluetooth device, the Bluetooth

address of that device must be configured in

the reader.

The Bluetooth address can be found on the

other device. Mostly it is displayed on the

product label as a 12 digits number or a

number with 6 hex digit pairs.

To configure an Opticon Bluetooth bar code

reader to connect to a third party Bluetooth

dongle, the following steps must be taken:

• step 1 - retrieve the dongle’s MAC address

• step 2 - set the reader to connect directly to a

computer

• step 3 - set the MAC address of the dongle in

the reader

• step 4 - establish connection to the Bluetooth

module

Example for manually connection and

configuration:

Example Step 1.

The following information is retrieved from the

dongle's Bluetooth manager:

Dongle make/type: MSI MS6967

Bluetooth Address: 00 04 12 34 AF 56

Secure Connection: Not Required.

Example Step 2.

• read the following codes:

<SET>

<Connect to PC>

Example Step 3.

Note: when reading the same menu label

again, it is necessary to keep the reader away

from the menu book for about one second.

• from this chapter read:

<Set bluetooth address label>

• from the chapter Direct input numeric read:

<0>

keep reader away from menu book...

<0>

keep reader away from menu book...

<0>

<4> <1> <2> <3> <4>

• from the chapter Direct input character read:

<A> <F>

• from the chapter Direct input numeric read:

<5> <6>

• from this chapter read:

<End bluetooth address label>

<END>

Example Step 4.

• read the command label:

<Manually connect>

Commands for (dis)connection:

In case a Bluetooth address is already

configured, the reader can be manually

connected or disconnected with the

following command labels:

• connection: <Manually connect>

• disconnection: <Manually disconnect>

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 150 151

Comentários a estes Manuais

Sem comentários