Code CR2500 Manual do Utilizador Página 10
- Página / 62
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
C004386_07_CR2500_User_Manual - 4
Save Settings
1.7 - Cabled Operation
1.5 - Powering On/Off Reader
To power on the reader, press and hold either of the red trigger buttons for 3 seconds (Figure 1.9).
The reader will power down after 2 hours of non-use. To change the default settings, please see Section 4.7 - Reader
Power Off Settings.
1.6 - Batch Operation
1.6.1 - Introduction
Batch data storage and data transfer are controlled by the resident JavaScript application on your CR2500 reader. Please
consult the Code Viewer user manual for the application on your CR2500 for instructions on how to control data storage
and transfer.
1.7.1- Introduction
The CR2500 is a Multi-Interface Unit (MIU) and is available with USB (6 ft. or 12 ft.), RS-232 (Serial) and PS/2 cables. All of
the cables are connected to the CR2500 with a 8-pin DIN connector (Figure 1.3)
Hand Held CR2500 - To install a cable directly to the CR2500, correctly line up the 8-pin DIN connector into the back end
of the reader. The arrows on the connector should be facing down (Figure 1.10). When the reader and the cable connector
are lined up, rmly push the cable into the reader. The cable has a locking mechanism that will rmly hold the cable in place
(Figure 1.11). To deattach the cable from the reader, you must pinch the plastic on the 8-pin DIN and pull back to disengage
the connector.
Figure 1.10 Figure 1.11
Figure 1.9
- Code Reader 2500 1
- Code Reader 2500 User Manual 3
- Table of Contents 4
- Chapter 1 - Getting Started 7
- 1.1 - Introduction 8
- 1.4 - Attaching Handles 9
- 1.7 - Cabled Operation 10
- 1.5 - Powering On/Off Reader 10
- 1.6 - Batch Operation 10
- Save Settings 12
- 1.7.2.2 - Keyboard Support 13
- PS/2 Factory Reset 14
- 15
- 1.8.1 - Introduction 17
- (continued) 18
- (Continued) 22
- 1.11 - Decode Zone 30
- 2.1 - Introduction 32
- Left Trigger Take Picture 34
- Right Trigger Take Picture 34
- Handle Trigger Take Picture 35
- 2.10 - Continuous Scan 36
- 3.1 - Aztec Symbology 39
- 3.2 - Codabar Symbology 39
- 3.3 - Codablock F Symbology 39
- 3.4 - Code 11 Symbology 39
- 3.5 - Code 39 Symbology 40
- 3.6 - Code 93 Symbology 40
- 3.7 - Code 128 Symbology 40
- 3.8 - Composite Symbologies 41
- 3.10 - GoCode® Symbology 41
- 3.9 - Data Matrix Symbology 41
- 3.12 - Maxicode Symbology 42
- 3.14 - Micro PDF417 Symbology 42
- 3.15 - MSI Plessy Symbology 43
- 3.18 - PDF 417 Symbology 43
- 3.16 - NEC 2 of 5 Symbology 43
- 3.19 - Pharmacode 44
- 3.20 - Postal Symbologies 44
- 3.21 - QR Code Symbology 44
- 3.23 - Telepen Symbology 45
- 3.24 - UPC/EAN/JAN 45
- 4.1 - LED Feedback 47
- Bluetooth Radio Feedback 48
- 4.3 - Code Readability Index 49
- 4.6 - Targeting Settings 50
- 4.9 - Reader Settings Lock 51
- 4.10 - Lock-out Link Mode 51
- 5.2 - Windowing 54
- 5.3 - Mirror Decoding 55
- 5.2 - Windowing (continued) 55
- 5.4 - Anti-Glare 55
- 6.1 - Prex Settings 57
- 6.2 - Sufx Settings 57
- 6.4 - Reader Text Commands 58
- 7.3 - Warranty 61
- 7.6 - CR2500 Maintenance 62
- 7.4 - CR2500 Accessories 62
- 7.3 - Warranty (continued) 62
Manuais e produtos relacionados com Equipamento Code CR2500
Equipamento Code CR4100 Manual do Utilizador
(9 páginas)
(9 páginas)
Equipamento Code CR3500 Manual do Utilizador
(64 páginas)
(64 páginas)
Equipamento Code CodeXML Router Manual do Utilizador
(21 páginas)
(21 páginas)
Diode-led K-RANGE 24 Inline LED Remote Control manuels
Manuels d'utilisation et guides de l'utilisateur pour Éclairage Diode-led K-RANGE 24 Inline LED Remote Control.
Nous fournissons des manuels en pdf 1 Diode-led K-RANGE 24 Inline LED Remote Control à télécharger gratuitement par type de document : Manuel de l'utilisateur
Comentários a estes Manuais