Code CR3600DPM Informações Técnicas descarregar pdf (Página 19)

10/29/2014

Page 19 of 72



12393 South Gateway Park Place Suite 600, Draper, UT 84020



(801) 495-2200



FAX (801) 495-0280

Reg

Setting Name

Default

(Hex)

Comment

Bluetooth® Radio

Out-of-range indicator

Binary Dip Switch

Bit

Controls

Value

Vibrate

0: Disabled

1: Enabled

Beep

0: Disabled

1: Enabled

Note: Readers with a vibration motor are the CR1400, CR2600,

CR3600 and CR6000.

Continuous Illumination

During Read

0: Minimal Illumination (Illumination stops whenever not needed

during the Read Cycle – this produces a little more flashing but

reduces power consumption to a degree)

1: Leave Illumination On Until End of the Read Cycle

Leave illumination on during read

USB Declaration Wait

State

0: Declare enumeration after receipt of set LED status report

1: Declare enumeration after receipt of get report descriptor

command (used for some Windows CE-based devices)

Special case for USB enumeration that doesn’t require Host

keyboard response

Reader Packet Format

1: Raw Mode

2: Packet Mode

4: Encrypted Packet Mode (Version 2)

5: AES Encryption Mode (Version 4)

6: Safe Upgrade Mode (Version 1)

This setting is used in conjunction with registers 1B and 42 to

configure the communication mode between standard “one-way”

and “two-way” modes.

For example, USB “two-way” native:

1B: 5 (USB Native)

08: 2 (packet mode)

42: 1 (expect response)

Also see registers: 1B, 42

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 71 72

Comentários a estes Manuais

Sem comentários

Code CR3600DPM Informações Técnicas Página 19

Comentários a estes Manuais

Manuais e produtos relacionados com Leitores de códigos de barras Code CR3600DPM