
10/29/2014
Page 43 of 72
© 2014 The Code Corporation
12393 South Gateway Park Place Suite 600, Draper, UT 84020
(801) 495-2200
FAX (801) 495-0280
1: Enabled
Note: This register has no effect on a CR900FD without the proper
2D barcode decoding license.
1: Enabled
Note: This register has no effect on a CR900FD without the proper
2D barcode decoding license.
Also see registers: 29, 2A
Composite Codes
Require Both Elements
0: Accept any composite element
1: Only accept composite codes if both elements could be decoded.
Also see registers: 34, 4A, DB
CR2300:
CR2600:
CR3600:
0F (#15)
CR4405:
5
Valid Range: 0 to 7FFFFFFF Seconds
The Reader will attempt connection for up to this amount of time
when a connection is explicitly requested, such as when a
QuickConnect code is read or an upload is requested (by event or
command).
Note: Only applies to readers using Bluetooth communication
modes.
1: Enabled
When enabled, multiple valid decodes from a single read are
concatenated. This includes Composite codes or when multiple
barcode reading is enabled.
Also see registers: 34, 4A
Trigger 1 Confirmation
Time (ms)
Valid Range: 0 to 7FFFFFFF Milliseconds
The trigger input must be asserted for this amount of time before
the trigger event is generated. Setting this value > 0 makes it easier
to select combinations of triggers (e.g. trigger 3, which is trigger 1 &
2 asserted together).
Trigger 2 Confirmation
Time (ms)
Valid Range: 0 to 7FFFFFFF Milliseconds
The trigger input must be asserted for this amount of time before
the trigger event is generated. Setting this value > 0 makes it easier
to select combinations of triggers (e.g. trigger 3, which is trigger 1 &
2 asserted together).
Comentários a estes Manuais